Hypro 450XL Tractor processor

HYPRO 450 XL is a versatile, strong, simple and easy-to-manoeuvre tractor processor. It is a highly-valued and popular all-round machine that functions equally impressively for small final thinnings as first thinnings. HYPRO 450 XL has High and Low speed, which enables a very high feed rate, 5m/sec, in high speed mode which provides major benefits when operating in forest with smaller trees. The low speed mode has a feed rate of 3.5 m/sec and a very high starting torque combined with a raw strength for use when operating in forest with larger trees. The machine has a maximum opening diameter of 45 cm and a total delimbing diameter from 40 cm down to 5 cm, it also has a fully hydraulic and very powerful high-speed cutting capacity that cuts without splitting. The processor is equipped with a separate hydraulic system with its own pump and tank where the pump is connected directly to the tractor’s power take-off or via a power transmission shaft with the pump mounted on the processor’s frame as an alternative design